Model X High Speed Sublimation printer
14
1.2 Environmental requirements for printer
The temperature is generally controlled at 25°C~30°C, and the humidity is controlled at
55%~75%RH.
Avoid direct exposure of the printer to sunlight, strong light, wind or heat.
Leave enough space around the printer to ensure proper ventilation of the printer.
The workplace must be clean, free of dust and vibration, smoking and fire must be
strictly prohibited
The installation ground should be stable and the machine should not be installed on a
slope floor (the height difference for 2 square meters have to be less than 2mm)
No strong magnetic field interference.
To Next Page
Loading...
