Atexco X - 7.7 Lift Motor Error; 7.8 Print Clog

Model X High Speed Sublimation printer
59
7.7 Lift motor error
(1) Fault code: error27
(2) Troubleshooting method:
Check that the power and drive of the lift motor are working properly and check that the
mechanical parts connected to the lift motor are smooth.
7.8 Print clog
（1) Phenomenon: A color is clogged during the printing process.
Figure 7-3
Figure 7-4
(2) Troubleshooting method
1. Check whether the ambient temperature and humidity are suitable, the normal temperature and
humidity must be controlled within the appropriate range (temperature 20 ° C ~ 30 ° C, humidity
Here the color is lighter, it is
already clogged, and the
nozzle needs to be cleaned.
Here the color has
changed, the nozzle is
clogged, and the nozzle
needs to be cleaned.