Atexco X - 2.5 Drying Control

Model X High Speed Sublimation printer
24
return the nozzle to normal
printing status.
⒀
Negative pressure
adjustment
Adjust the negative pressure
value of the nozzle so that the
nozzle does not hang ink. The
larger the value, the larger the
negative pressure value.
2.5 Drying control
Figure 2-8 Drying off
Figure 2-9 Drying work in progress’ temperature
Ink bucket full
Heating off
Real-time
temperature
Set
temperature
Constant
temperature
setting
Heating
Constant
temperature
Heating
alarm
Ink bucket full
Heating
Constant
temperature
Heating
alarm
Heating on
Real-time
temperature
Set
temperature
Constant
temperature
setting