Model X High Speed Sublimation printer
5
§ Excessively moist and dry places
§ Direct sunlight rooms
§ Hot places
§ Near an open flame or humid places
Using the printer in the following places may cause the machine to malfunction or fail
• Producing a strong magnetic field near the device.
The printer is suitable for use at temperatures between 25 ° C and 30 ° C and a humidity of
55% - 75% RH.
Ensure that there is enough room around the printer
In order to ensure smooth operation, sufficient operating space should be reserved around the
front and rear of the printer.
Power supply safety precautions
WARNI N G
Do not damage the power cord or attempt to repair it, and do not place heavy objects on the
power cord or bend it excessively.
Failure to do so may result in electric leakage due to damage, resulting in fire or short circuit.
Do not use a wet hand to plug in the power supply, which may cause a short circuit.
Avoid connecting many devices to the same power outlet.
Failure to do so may result in fire or short circuit.
Do not bundle or wrap the power cord.
Failure to do so may result in fire or short circuit.
To Next Page
Loading...
