Model X High Speed Sublimation printer
4
Safety guidance
Please read the following instructions before using your Model X High Speed Sublimation printer and
follow the warnings and instructions marked on the printer:
Printer installation considerations
WARNI N G
Do not install the printer near solvents such as alcohol or thinner.
If solvents come into contact with internal electronic components, it may cause fire or a short
circuit.
Do not place the following items on the printer.
These items may come into contact with internal electronic components and may cause fire
and electrical shorts.
• Metal objects like necklaces.
• Objects such as glasses, vases, houseplants, including water and other liquids.
CAUTION
Do not place the printer in an insecure location, such as on a slope or where it can easily
vibrate or shake.
Such a placement will cause the printer to tip over and be damaged.
Do not place heavy objects on the printer.
Heavy objects may tip over and damage the machine.
If the printer is placed on a smooth surface, be sure to use the wheel brake to avoid moving
when using the printer.
If the printer is not placed properly, the printer could trip over and be damaged.
Avoid using the printer in the following places.
Using the printer in these locations may cause fire and short circuits.
To Next Page
Loading...
