Model X High Speed Sublimation printer
8
CAUTION
Take care to prevent internal electrical components from being in contact with metal objects
or liquids, as this may result in fire or electric shock.
Do not put your hand on the printer while printing.
Do not move the print head by hand as it may damage the printer.
Make sure the power cord is connected properly.
Facing some of these circumstances, after disconnecting the power source, please contact
experienced maintenance personnel to check the printer:
If the power cord or plug is damaged;
If liquid spills into the printer;
If the printer falls or the case is broken;
If the printer does not operate properly or there is a significant change in performance;
Maintenance and inspection
WARNI N G
Be sure to turn off the power and do not perform any cleaning work until the power plug is
removed from the power outlet.
Failure to do so may result in damage to the machine, fire hazard, and electric shock.
Clean the printer with a cloth that has been wetted with the cleaning solution. Do not use a
volatile solvent such as alcohol or benzene to clean the printer.
To Next Page
Loading...
