Atexco S - Page 56

Model S High Speed Sublimation printer
56
16
115
EC_FIBER_ERR
Fiber optic can't
communicate
optical fiber wiring unnormal
17
116
EC_EMPTY_PAPER
Empty paper alarm
paper used up
18
117
EC_PAPATABLE_ID_ERR
The parameter table ID does
not match the registration ID
Parametric unnormal error
19
118
EC_PAPA_INIT_ERR
Invalid parameter table
Parametric unnormal error
20
119
EC_CAR_IN_BOT
The main program is not
written on the car board
Program unnormal
21
120
EC_HEAD_MOTOR_ERR
Error of printhead lifting
motor
Inductor of Headframe Lifting Motor
unnormal
22
121
EC_STMTR_LIMIT_ERR
Paper feeding limit
Abnormal table limit sensor unnormal
23
122
EC_STMTR_INIT_ERR
Paper initialization error
table limit sensor unnormal
24
123
EC_CARRIER_FANGZHUANG
Anti-crash
Anti-crash trigger or disconnect
25
124
EC_CARRIER_INIT_FANGZHUANG
Anti-crash in initialization
Anti-crash trigger or disconnect
26
125
EC_INK_AQP_WARNING
Ink overflow
Chen ink waste ink bottle
27
126
EC_CAR_FACTOR_MIN_LIMIT
Car transmission ratio too
small
Too Small Gear Transmission Ratio of
Electric Machines
28
127
EC_CAR_FACTOR_MAX_LIMIT
Car transmission ratio too
large
Too large Gear Transmission Ratio of
Electric Machines
29
128
EC_HEAD_TYPE_ERR
Car board wrong type
Main board(data parameter) not match to
car board (FPGA)
30
129
EC_UP_DOWN_SENSOR_PAUSE_ERR
Counter sensor pause work
during printing
Sensor detected foreign object
31
130
EC_EX_RAM_ERR
Outer Ram error
Board and plate error, return to factory
32
131
EC_STOP_POS_OFFSET_ERR
Position difference when car
stopped
200mm
Motor, raster error; power error
33
132
EC_CAR_START_POS_ERR
Wrong position when car
moves
＞5000mm
Motor, raster error; power error
34
133
EC_MULTI_PRINTER_START_ERR
Multi computer system start
error
Multi computer system start error, can not
find
35
134
EC_SDR_CHECK_ERR
SDR start-up detection error,
undetectable
SDR detection error, re-start it, return for
repair if not solved
36
135
EC_EXMOTOR_LINK_ERR
Use ink tank extend board to
connect
Check if the extend board is correctly
connected
37
136
EC_TEMPERATURE_ERR
Temperature alarm
38
137
EC_HUMIDITY_ERR
Humidity alarm
39
138
EC_FPGA_RESET_TIMEOUT_ERR
FPGA reset timeout
Restart the printer, return back for repair if
still not work
40
139
EC_EX_APPLY_RAM_ERR
Failure to apply external
SRAM, for 485 initialization
41
140
EC_MULTI_COMMUNICAT_ERR
Communication failure for
the 485 in multi-computer
42
141
EC_Multiprinter_SwathErr
43
142
EC_MainInkBoxEmpty
Main Ink box is empty
44
143
EC_WasteInkBoxFull
Waste ink box is full