ATI Technologies PROFINET DL10 - User Manual

Manual, Control Module, PROFINET, DL10
Document #9620-20-C-DL10-04
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel: 919.772.0115 • Fax: 919.772.8259 • www.ati-ia.com
C-1
Table of Contents
Glossary ........................................................................................................................................C-4
C. Control and Signal Modules
...................................................................................................C-6
DL10—PROFINET
®
Control/Signal Module ...............................................................................C-6
1. Product Overview ..................................................................................................................C-6
1.1 DL10 Master Module ................................................................................................................. C-6
1.2 DL10 Tool Module ...................................................................................................................... C-7
1.3 DL15 Tool Module ...................................................................................................................... C-7
2. Product Information ..............................................................................................................C-8
2.1 Master Module ........................................................................................................................... C-8
2.1.1 PROFINET Interface Information ................................................................................... C-8
2.1.2 System Failure (SF) and Bus Failure (BF) LEDs ..........................................................C-11
2.1.3 Ethernet 1 and Ethernet 2 LEDs .................................................................................. C-12
2.1.4 Integrated Ethernet Switch ........................................................................................... C-12
2.1.5 Reset-To-Factory Push-Button ..................................................................................... C-13
2.2 Arc Prevention Circuit ............................................................................................................ C-13
2.2.1 Arc Prevention Circuit Behavior during Coupling ......................................................... C-14
2.2.2 Arc Prevention Circuit Behavior during Coupling ......................................................... C-14
2.2.3 Arc Prevention Circuit Behavior during Uncoupling ..................................................... C-15
2.3 Tool Module ............................................................................................................................. C-16
2.3.1 Tool-ID .......................................................................................................................... C-16
2.4 Tool Side TSI ............................................................................................................................ C-17
2.5 TSI Operational Function ........................................................................................................ C-19
2.5.1 The Master is Free of the Stand and the Tool is in the Stand ...................................... C-19
2.5.1.1 RTL Bypass Relay Circuit ............................................................................. C-19
2.5.2 The Master is Coupled with the Tool and the Tool is in the Stand ................................ C-20
2.5.3 The Master is Coupled with the Tool and the Tool is Free of the Stand ....................... C-21
2.5.4 TSI Behavior ................................................................................................................. C-22

ATI Technologies PROFINET DL10 Specifications