Atlantic Duolix Max - Adjusting the Imbalance; Adjusting the Night Cooling Flow

12
Provide the control with the «Val 1» value from the
previous table.
Use the navigation arrows and to increase or
reduce the desired flow value.
Then validate the desired value by pressing
When the symbol OK appears, the choice is confirmed.
Provide to the control with the value «Val 2» from the
previous table.
Use the navigation arrows and to increase or
reduce the desired flow value.
Then confirm the desired value by pressing
When the OK symbol appears, the choice is confirmed.
5.4.3. Adjusting the imbalance
Use the navigation arrows and to modify the imbalance:
• Pressing the left arrowreduces the air injection flow
(for an unchanged extracted air)
• Pressing the right arrowincreases the air injection
flow (for unchanged extracted air);
Then validate the desired value by pressing
When the Ok symbol appears, the choice is confirmed.
5.4.4. Adjusting the night cooling flow
Use the navigation keysandto increase or reduce
the desired flow value during night cooling activation.
Then validate the desired value by pressing
When the Ok symbol appears, the choice is confirmed.
m
3
/h
Val 1
Max
m
3
/h
BOOST
m
3
/h
Val 2
m
3
/h