22
UNLOCKING THE DEVICE HANGING FRAME
FIXING THE HANGING FRAME TO THE WALL
Locate the
locks on each
side of the de-
vice.
Take a flat screwdriver and
turn the locks to unlock the
device’s attachment lug.
Pull gently and then lift and release the device’s attach-
ment lug.
1
2
3
LOCK
LOCK
Unlock position
Place the hanging
frame on the floor
against the wall. Lo-
cate drilling
points A.
Refit the hanging
frame, lining up with
drilling points A to
find drilling points B
(you can also use a
level).
Drilling points A show the position for the lower fastenings. Drilling points B show the position for the upper fastenings.
Drill the 4 holes and insert the wall plugs.
Use suitable wall plugs when fitting on a specific support
(e.g. plasterboard wall).
Position the hanging frame and screw it down.
1
2
3
4
Drilling
points A
Drilling
points A
Drilling
points B
To Next Page
Loading...
