21
Installation guidelines
- This device was designed to be installed in residential premises. In any other case, please call your distributor.
- Installation must comply with the standards currently enforced in the country of use.
- The device must be supplied with 230V single-phase 50Hz.
-
In damp areas such as bathrooms and kitchens, you must install the connection box at least 25cm above the floor.
Keep the device away from any draughts that ma y interfere with its operation (e .g.: under a centrally control-
led fan, etc ...).
Do not install the device under a fixed socket.
Comply with the minimum distances from
any furniture units when positioning the de-
vice.
Volume
3
Volume
2
60 cm
60 cm
60 cm
3m
2,25 m
Volume
1
30
50
12
PREPARING THE INSTALLATION OF THE DEVICE
Volume 1 No electrical device
Volume 2 Class II IPX24 electrical device
Volume 3 Class II electrical device
Installation
GB
To Next Page
Loading...
