25
Operation
For your comfort and to save energy, your device is equipped with a digital-display control unit. You can set all of the de-
vice’s functions from the unit.
When it is first switched on, the device may give off a slight odour. This is not the result of any fault in the device and the
odour will dissipate after a few minutes. If necessary, air the room until the odour dissipates.
A
B
C
D
E
F
G
A
Balance function
B
Airing function
C
Programming / Set the correct time and day
D
Increase the temperature / Scroll
E
Turn on / Change heating modes – scroll / Standby
F
Lower the temperature / Scroll
G
Consumption indicator function
The different displays
Control box
Remove the plastic film on the control unit
After 2 minutes of inactivity, the screen returns to the main display.
PROG
Program displayed
Program selection
Airing function
Advised Eco temperature
Day and time
Action not possible
Consumption indicators
Temperature display or day
and time if being set
Controls locked
Heating indicator
Modes
GB
To Next Page
Loading...
