Operator’s instructions
4. Control
50
Tachometer
Shows the current speed
of the diesel engine.
Fuel level gauge
Shows the quantity of
diesel available in the
tank. The level is shown
on the analogue
instrument. A lamp starts
to flash on the instrument
when 75 litres remain.
Hydraulic Oil Temp
Shows the current
temperature of the
hydraulic oil.
Compressor temperature
Shows the temperature of
the compressor. At 115 °C
the instrument triggers an
alarm, at 120 °C the diesel
engine is switched off.
Voltmeter
Measures and shows how
many volts the rig's
batteries have.
Oil Pressure Gauge
Shows the oil pressure in
the diesel engine to one
decimal place.
Coolant temperature
Shows coolant
temperature.
Turbo Pressure
Shows the diesel engine's
charge pressure for the
turbocharger.
fuel consumption
Shows the current fuel
consumption for the diesel
engine in litres per hour.
Load
Shows the current load on
the diesel engine in %.
Fuel pressure
Shows the fuel pressure
for the diesel engine on
the high pressure side,
(only available in certain
systems).
Fault codes
Only shown if there is one
or more fault codes from
the diesel engine. To
proceed to Cummins PTC
codes, double-click on
one of the panel's buttons.
If there are several codes
then access the next one
by clicking again. The
code can be
acknowledged by holding
a button depressed for 5
seconds.
Symbol Description Symbol Description
1250 0162 78
1250 0095 86
12
7
To Next Page
Loading...
