- 67 -
Maintenance schedule Daily
50 km
after initial
start-up
Every 500
hours
Every 1000
hours
Every 2000
hours
Yearly
Service pak -
2912 4412 05 or
2912 4546 05
*
--
For the most important subassemblies, Atlas Copco has developed service kits that combine all wear parts. These service kits offer you the benefits of genuine parts,
save on administration costs and are offered at reduced price, compared to the loose components. Refer to the parts list for more information on the contents of the
service kits.
Check tyre pressure x x x x
Check tyres for uneven wear xx
Check torque of wheel nuts x x x
Check coupling head x xx
Check height of adjusting facility x x
Check towbar handbrake lever spring actuator,
reversing lever, linkage and all movable parts for ease of
movement
xx x x x
Grease coupling head, towbar bearings at the housing of
the overrun brake
xxx
Check brake system (if installed) and adjust if necessary x x x
Oil or grease brake lever and moving parts such as bolts
and joints
xxx
Grease sliding points on height adjusting parts xx
Check safety cable for damage xx
Check Bowden cable on height adjustable connection
device for damage
xx
Lubricate torsion bar axle trailing arm xx
Check brake lining wear x
Change wheel hub bearing grease x
To Next Page
Loading...
