Atlas Copco QAS 60 Pd - Page 68

- 68 -
Check/Adjust lateral play of wheel bearing
(conventional bearing)
xxx
Generators in standby application have to be tested on a regular basis. At least once a
month the engine should run for one hour. If possible a high load (> 30%) should be
applied so that the engine reaches its operating temperature.
Maintenance schedule Daily
50 km
after initial
start-up
Every 500
hours
Every 1000
hours
Every 2000
hours
Yearly
Service pak -
2912 4412 05 or
2912 4546 05
*
--
!