• Push the Enter key; the active input is now set as main chart.
Changing the main chart input
To set another input as main chart, proceed as follows:
• Navigate to the input screen as described above.
• Push the Enter key; the first input on the screen will be highlighted in grey.
• Using the arrow keys, scroll to the input to be set as main chart.
• Push the Enter key; following screen appears:
(1) Inputs
(2) Main chart signal
(3) Set as main chart signal
(4) Modify
• Push the Enter key; following screen appears:
(1) Main chart signal
(2) Are you sure to change the main chart signal? All current chart data will be lost!
(3) Yes
(4) No
• Select the Yes key to confirm or the No key to cancel the modification operation.
Instruction book
2920 1815 04 153
To Next Page
Loading...
Need help?
General
