Installation Requirement 6
PV-10PX / PV-10HPX
Installation Requirement
Tools Required
Rotary Hammer Drill (3/4in bit) Carpenter’s Chalk
Hammer Screw Drivers
4 Foot Level Tape Measure (25ft)
Crescent Wrench (12”) Pliers
Ratchet & Socket (28mm) Allen Head Wrench (3mm, 5mm, 8mm)
Wrench set (mm)
(10#, 13#, 14#, 15#, 17#, 19#, 24#, 27#, 30#)
Vise Grips
Fig. 3