5
SAMA5D3x-EK User Guide [USER GUIDE]
11180B–ATARM–29-Oct-13
2. Power Up
2.1 Power up the Board
Unpack the board, taking care to avoid electrostatic discharge. Unpack the power supply, select the right power plug
adapter corresponding to that of your country and insert it in the power supply.
Connect the power supply DC connector to the board and plug the power supply to an AC power plug.
The LCD should light up and display a welcome page. Click or touch icons displayed on the screen and view the demo
(the red ones need to be replaced by demo software).
2.2 Sample Code and Technical Support
After booting up the board, you can run sample code or your own application on the development kit. You can download
sample code and get technical support from the Atmel web site.
Linux software and demos can be found on the web site Linux4SAM.
To Next Page
Loading...
Need help?
General
