EasyManua.ls Logo

Atmel XMEGA A3 series User Manual

Atmel XMEGA A3 series
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Features
High-performance, Low-power AVR 8/16-bit XMEGA Microcontroller
Non-volatile Program and Data Memories
64K - 256K Bytes of In-System Self-Programmable Flash
4K - 8K Boot Code Section with Independent Lock Bits
2K - 4K Bytes EEPROM
4K - 16K Bytes Internal SRAM
External Bus Interface for up to 16M bytes SRAM
External Bus Interface for up to 128M Bytes SDRAM
Peripheral Features
Four-channel DMA Controller with support for external requests
Eight-channel Event System
Seven 16-bit Timer/Counters
Four Timer/Counters with 4 Output Compare or Input Capture channels
Three Timer/Counters with 2 Output Compare or Input Capture channels
High Resolution Extensions on all Timer/Counters
Advanced Waveform Extension on one Timer/Counter
Seven USARTs
IrDA Extension on 1 USART
AES and DES Crypto Engine
Two Two-wire Interfaces with dual address match(I
2
C and SMBus compatible)
Three SPI (Serial Peripheral Interfaces)
16-bit Real Time Counter with Separate Oscillator
Two Eight-channel, 12-bit, 2 Msps Analog to Digital Converters
One Two-channel, 12-bit, 1 Msps Digital to Analog Converter
Four Analog Comparators with Window compare function
External Interrupts on all General Purpose I/O pins
Programmable Watchdog Timer with Separate On-chip Ultra Low Power Oscillator
Special Microcontroller Features
Power-on Reset and Programmable Brown-out Detection
Internal and External Clock Options with PLL
Programmable Multi-level Interrupt Controller
Sleep Modes: Idle, Power-down, Standby, Power-save, Extended Standby
Advanced Programming, Test and Debugging Interfaces
JTAG (IEEE 1149.1 Compliant) Interface for test, debug and programming
PDI (Program and Debug Interface) for programming, test and debugging
I/O and Packages
50 Programmable I/O Lines
64-lead TQFP
64-pad MLF
Operating Voltage
1.6 – 3.6V
Speed performance
0 – 12 MHz @ 1.6 – 3.6V
0 – 32 MHz @ 2.7 – 3.6V
Typical Applications
Industrial control Climate control Hand-held battery applications
Factory automation ZigBee Power tools
Building control Motor control HVAC
Board control Networking Metering
White Goods Optical Medical Applications
8/16-bit
XMEGA A3
Microcontroller
ATxmega256A3
ATxmega192A3
ATxmega128A3
ATxmega64A3
Preliminary
8068C–AVR–06/08

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Atmel XMEGA A3 series and is the answer not in the manual?

Atmel XMEGA A3 series Specifications

General IconGeneral
Operating Voltage1.6V - 3.6V
Flash Memory64KB - 256KB
SRAM4KB - 16KB
EEPROM2KB - 4KB
Clock Speed32 MHz
ADC12-bit
DAC12-bit
Analog Input ChannelsUp to 16
Communication InterfacesUSART, SPI, TWI (I2C)
PackageTQFP, QFN
Core8-bit AVR

Related product manuals