TROUBLESHOOTING
10
35
ALERT EXPLANATION
WOOD MOISTURE
ALERT
Wood moisture sensor is reading an elevated moisture level. If this alert
remains active for a period of time, the space should be checked.
HIGH WATER
ALERT
Water alert sensor has detected water at the location of the sensor. If
this alert is triggered, the space should be checked immediately for a
possible leak or hardware failure of a pump or condenser.
LOW TEMPERATURE
ALERT
(ACE) In its default setting, the alert temperature is below 34°F in the
space. If there is a concern of freezing pipes, the space should be
watched and evaluated.
ELEVATED RH
ALERT
(ACE) In its default setting, this alert is turned off. The alert will trigger if
sensor reads over the average RH set point for a period of time. Once
triggered, the alert will remain on until the average is below RH set
point so it may take a few days to clear. Humidity can fluctuate so there
is no reason for immediate concern if this alert is triggered. If the alert
remains active for an extended period of time, then the space should be
checked.
ALERTS
To Next Page