OPERATOR’S GUIDE
01
4
OPERATING PRINCIPLE
Unfinished spaces of your house need proper ventilation and/or dehumidification. The goal of
ATMOX is simple – reduce the moisture level in your crawl space and reduce both heat and
moisture levels in your attic.
The basic principle of how it works is also simple. Ventilate with “good” air from the outside only
when it will improve conditions in the space. The ATMOX controllers use sensors to measure
temperature and humidity and then calculate dew point both inside and outside. Based on the data,
the software will determine the best course of action to reduce moisture and/or heat. In a crawl space
environment, ATMOX can incorporate a dehumidifier in addition to fans that circulate internal air.
ATMOX systems are designed with a focus on energy efficiency and air quality of the home. Once
installed, the ATMOX system will operate automatically.
INFORMATIONAL SCREENS
The ATMOX display will automatically rotate through its standard informational screens about every
five seconds. To scroll more quickly, press the Information button.
WHAT EACH SCREEN DISPLAYS WHILE SCROLLING:
CONTROLLER
MODEL NAME
DEW POINT
OUTSIDE & INSIDE
RELATIVE HUMIDITY
OUTSIDE & INSIDE
Do not adjust settings on your system without talking to your
installer. Improper settings can negatively affect the operation of
the ATMOX system.
CAUTION
TEMPERATURE
OUTSIDE & INSIDE
To Next Page
Loading...