6. Autofocus
6.2.5 LaserGRBL Automatic Focus Control:
a) In the toolbar below, right-click on a blank area to open the "Add
Custom Button" window. Click on "Add Custom Button".
b) Enter [ESP500] in "GCode" and enter the button name in "Caption" and
"Tooltip" to customize the button image on the left side. Click "Save" to
generate a custom button with the corresponding function.
6.2.6 How to use Auto Focus function in Lightburn and LaserGRBL:
Move the focus to the top of the engraving object and click the "Auto Focus" button to sta the automatic focus according to the settings.
7
To Next Page
Loading...
