TH303
13
To modify the schedule, proceed as follows:
To skip a period
: When the hour or the temperature of the period is flashing, press the
Up
and
Down
buttons at the same time. (Alternatively, set its hour between 23:00 [11:00 PM] and 0:00 [midnight] or
its temperature below 5°C [41°F].) Its time and temperature display will be replaced by dashes (-).
NOTE:
If you do not press any button for one minute,
the thermostat will automatically save any
changes you have made and will
return to its normal display
.
Modifying the schedule
Program menu
(3 sec.)
Select the days*
Normal display
Select the period
Set the hour
Set the minutes
Set the temperature
Select Exit to return to
the day selection menu
Select Exit to return
to normal display
* The days can be selected collectively (Monday to Friday, Saturday & Sunday, or Monday to Sunday) or individually.
To Next Page
Loading...
Need help?
General
