6) The Backlight level, screensaver and screensaver delay can be set by means of three dropdown
boxes. This setting can also be changed in the MWX65 settings menu. (If “Block settings menu” isn’t
checked)
7) When the settings are made, press the “Save to Wallpanel” button and the settings will be send to
the selected MWX65 wall panel.
Previously made settings can be retrieved from the wall panel by clicking the “Load from Wallpanel”
button. Hereby, the settings which are stored in the wall panel will be displayed in this window, making
it possible to make any changes to the current settings.
To Next Page
Loading...
