EasyManuals Logo

AUDAC SMA Series User Manual

AUDAC SMA Series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
SMA&SMQ - User manual 019
Chapter 5
Conguring the amplier
The conguration of the amplier can be done using the controls on the front panel of the amplier. A
graphical user interface is shown on the front panel LCD display which guarantees an intuitive and user
friendly experience. The menu structure is shown in below diagram, giving an overview of the conguration
possibilities. The following pages contain detailed explanations for every congurable function.
Level
Input
Mute
Output setup
General setup
Lock
Back
-70 dB ~ 0 dB
/ On
Low pass
Type:
-
-
- Bessel
- Linkwitz - Riley
Roll-
:
- 12 dB / Oct
- 24 dB / Oct
Frequency:
- 1 Hz ~ 22 kHz
(Steps of 1 Hz)
High pass
Type:
-
-
- Bessel
- Linkwitz - Riley
Roll-
:
- 12 dB / Oct
- 24 dB / Oct
Frequency:
- 1 Hz ~ 22 kHz
(Steps of 1 Hz)
Back
EQ Frequency:
- Band 1 – 7
1 Hz ~ 22 kHz
(Steps of 1 Hz)
EQ Q-factor:
- Band 1 – 7
0.1 ~ 15
(Steps of 0.1)
Back
Back
EQ Level
- Band 1 – 7
+15 dB ~ -15 dB
(Steps of 1 dB)
Input 1 Input 2
Input 1 + 2
Input 3
Input 4 Input 3 + 4
Input gain
Input 1
Only SMQ
Input 2
Input 3 Input 4
Back
Only SMQ
ANI required
ANI required
-16.5 ~ 30.75 dB
(Steps of 0.75 dB)
Address
Change address
Adjustable from ‘000’ to ‘ 999’
passwords
Change Admin or user password
Adjustable from ‘0000’ to ‘9999’
Admin PIN
Change PIN admin
Adjustable from ‘0000’ to ‘9999’
Change PIN user
Adjustable from ‘0000’ to ‘9999’
User PIN
LCD
Brightness:
-
10% ~ 100%
:
- Never ~ 120 min
Lock device
Delay
0 ~ 12 meter
(Steps of 0.1)
Up to 35 ms
Max level
0 dB ~ -70 dB
Standby
Never ~ 60 min
Limiter
Output power in
steps of 25
at 8 Ohm
Phase Reverse
/ On
Dynamic bass
/ On
Bridge
/ On
Clear / Cancel
Back
USB
Save:
-
USB drive
Load:
-
from USB drive
Admin key:
- Create USB key
with admin access
Back
User key:
- Create USB key
with user access
Info
Model name
Temperature
Temperature
level for each
channel
Input list
Touchlink
Factory reset
factory default
ANI info Back
1 = INPUT 1
2 = INPUT 2
3 = INPUT 1+2
...
Add Delete
Back
SPKR Presets
TouchLink
(1 to 4)
Priority
list
- Input
- Volume
Back

Other manuals for AUDAC SMA Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AUDAC SMA Series and is the answer not in the manual?

AUDAC SMA Series Specifications

General IconGeneral
BrandAUDAC
ModelSMA Series
CategoryAmplifier
LanguageEnglish

Related product manuals