AUDAC SMA Series - Technical Specifications; Output Power and Frequency Response; Signal-to-Noise Ratio and Distortion; Inputs, Outputs, and Controls

SMA&SMQ - User manual 029
Technical specications
RMS Output Power SMA350 4 Ohm Stereo 2 x 350 Watt
(1kHz, THD 1%)
8 Ohm Stereo 2 x 220 Watt
8 Ohm Bridge 700 Watt
SMA500 4 Ohm Stereo 2 X 500 Watt
8 Ohm Stereo 2 x 300 Watt
8 Ohm Bridge 1000 Watt
SMA750 4 Ohm Stereo 2 x 750 Watt
8 Ohm Stereo 2 x 380 Watt
8 Ohm Bridge 1500 Watt
SMQ350 4 Ohm Stereo 4 x 350 Watt
8 Ohm Stereo 4 x 220 Watt
8 Ohm Bridge 2 x 700 Watt
SMQ500 4 Ohm Stereo 4 x 500 Watt
8 Ohm Stereo 4 x 300 Watt
8 Ohm Bridge 2 x 1000 Watt
SMQ750 4 Ohm Stereo 4 x 750 Watt
8 Ohm Stereo 4 x 380 Watt
8 Ohm Bridge 2 x 1500 Watt
SMQ1250 4 Ohm Stereo 4 x 1250 Watt
8 Ohm Stereo 4 x 630 Watt
8 Ohm Bridge 2 x 2500 Watt
Frequency response 20 Hz - 20 kHz
Signal to Noise Ratio >95 dB
Total Harmonic Distortion + Noise < 0.05%
Common Mode Rejection 70 dB
Crosstalk > 70 dB
Inputs Type Balanced Line
Connectors Female XLR Input
3-pin terminal block ~ 3.81mm
Impedance 10 k Ohm balanced
Sensitivity -30 dB ~ +5 dB
Output Type Loudspeaker Output
Connectors SpeakON compatible
2-pin terminal block ~ 5.08 mm
Controls DSP conguration via front panel
RS-232
Indicators Power
Protect
Peak