Following each intentional change in specified pressures, tire pres-
sures must be resaved .
After the pressures are saved, the tire pressure monitoring system
measures the current tire pressures and saves them as the new
specified pressures.
[ i ] Tips
• The tire pressure is shown on the tire pressure label. On USA
vehic les, the tire pressure label is located on the driver 's side 8-
pillar. On Canada vehicles, the tire pressure label is located either on
the driver's side 8-pi llar or insid e the fuel filler flap . The tire pressure
label lists the recommended cold tire inflation pressures for the
vehicle at its maximum capacity weight and the tires that were on
your vehicle at the time it was manufactured . For recommended tire
pressures for normal load conditions , please see chapter
=> page 271.
• The tire pressure monitoring system helps the driver to keep an
eye on tire pressures . But the driver st ill has t he responsibi lity for
maintaining the correct tire pressure . •
Contro ls and equip-
ment
Dri ve r informa t io n di s pl a y
App lies to veh icles: w ith tire pressure mo nito ring system
Changing a wheel
When you change a wheel, the new tire must be initial-
ized.
Fig. 33 Center disp lay:
tire pressure selecte d
Fig. 34 Center display:
Wheel change selected
Activate and proceed through the menu as specified in
step 1 above ~
page 43,
select Wheel change in the Tire pressure menu.
Programming is necessary:
• after rotating the wheels on the vehicle,
• if wheels with new wheel sensors are used .
~ehicle care Technical data
To Next Page
Loading...
