Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Checking oil level with dipstick ⇒ page 80
Checking oil level on MMI ⇒ page 80
3.45.1 Checking oil level with dipstick
Procedure:
– Pull out dipstick and wipe it off with a clean cloth.
– Re-insert dipstick into guide tube as far as it will go.
– Pull oil dipstick out again and read off oil level on marked area.
– Evaluate oil level and determine any necessary measures ac‐
cordingly:
Oil level: Evaluation/measure:
Marked area -arrow- Optimum oil level.
Area A Oil must not be topped up.
Area B Oil can be topped up.
Area C Oil must be topped up.
Note
Some engines are not fitted with an oil dipstick; if this is the case,
use the oil level display in the MMI system ⇒ page 80 .
3.45.2 Checking oil level on MMI
Procedure:
– If necessary, close bonnet.
– Switch on ignition and activate MMI.
– Press function selector button CAR .
– Under »Car systems«, navigate through following menu struc‐
ture:
♦ Servicing & checks
♦ Oil level
Audi A8 2010 ➤
Maintenance - Edition 11.2014
80 3. Maintenance
To Next Page
Loading...
