Opening and closing
Setting power locking
The driver can determine the functions for power locking
in the radio or in the MM/*.
Fig. 34 Display:
Central locking menu
In the Central locking menu you can decide which doors
should be unlocked when opening the vehicle.
- Select: Function button [CAR)>
Central locking.
For example, if you switch the item Unlocking single door On, the
passenger's door and t he rear doors are no longer included in the
power locking system, and will not be unlocked by pressing the
unlock button on the master key remote control.
You can continue to unlock all the doors and the rear lid as before .
Press the opening button on the master key twice.
In addition to this, the
Auto locking can be switched on and off.
When locking the vehicle, all doors and the trunk lid are locked auto -
matically.
If you switch
Trunk lid/tailgate On, then the handle on the rear lid
=>
page 46, fig. 41 is locked. In this case the rear lid can be opened
with the button
c:;; on the master key => fig. 35 or with the unlocking
button in the driver's door =>
page 46, fig. 40. If the vehicle has the
Convenience key* feature, then the handl e will continue to work
even if an valid key is near the proximity sensor.
If you select Fold mirrors * On, the automatic outside mirror fold
function is activated - the outside mirrors fold when the locking
button on the remote master key is operated ~ =>
page 66.
When you select Confirmation tone On, a confirmation tone sounds
when you lock the vehicle. •
Unlocking and locking the vehicle with the
remote control
Fig. 35 Remote
control: function
buttons
Either the driver's door only or the entire vehicle will unlock
when the unlock button © is pressed once, depending on
the settings in the radio or MMI *
Central locking menu
=> page 42.
- Press button m (@ ) to unlock the vehicle=> fig. 35.
- Press button
l'.D (@ ) to lock the vehicle => & in "General
description" on
page 40.
- Press the button C:5 (@ ) for at least one second to open
the rear lid. _.
To Next Page
Loading...
