M
N
0
...J
'SI:
,....,
\!)
..,.,
,....,
..,.,
,....,
Programming th e button in th e roof
headliner
.. Press and hold the previously programmed
button in the roof headli ner for 2 seconds .
.. To end rolling code programming, press and
hold the button again for two seconds .
.,. With some systems, the button may need to
be pressed a th ird time to end the program-
ming process.
After programming, the system should detect
the signal and begin moving when the button
in the roof headliner is pressed. Now you may
prog ram the othe r buttons as needed.
(D Tips
- The roll ing code can be programmed
more quickly and more easily w ith the
help of a second person.
- If you have diff iculty programming the
rolling code, referring to the user guide
fo r the system may help.
Opening and clo s in g 59
To Next Page
Loading...
