EasyManua.ls Logo

Audi R8 2014 - Cruise Cont Rol

Audi R8 2014
236 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64 On the road
indicate that the maximum speed has been
stored successfu lly. The maximum speed re-
mains stored until it is changed by pressing
the button aga in briefly or until it is deleted
by a lengthy push on the button.
Speed warning 2: setting a speed limit
Switches in the wiper arm ore used to operate
warning threshold
2.
'--------1 ®
Fig. 57 Cont rols
To store maximum speed
.,. Turn off the ignit ion .
.,. Briefly press t he button in the instrument
cluster
c::> page 63, fig . 56. The odometer
and the digital clo ck are now illumi nated .
.,. Press the but t on for at least 2 seconds . The
currently stored maxim um speed appears in
the display
or the crossed out symbol for
warning threshold 2, if no maximum speed
was set previous ly .
.,. Press t he fu nction selector sw itch in the
wiper lever @
c::> fig. 57 up or down to
change the set value . Values run up or dow n
in steps of 6 mph (10 km/h) .
To delete maximum speed
.,. Turn off the ignition.
... Briefly press the button in the instrument
cluster
c::> page 63, fig . 56. The odometer
and the d igital clock are now illuminated .
.,. Press the button fo r at least 2 seconds . The
currently stored maximum speed appea rs in
the display.
.,. Press the
1=R=E=s=ET""I button in the wiper lever
@ c::> fig. 57 until the crossed out speed
warning symbo l for warning threshold 2 ap -
pears in the display.
A few seconds after the adjustment is com-
pleted, the illumination for the odometer and
the d igital clock will go out.
(D Tips
This warning threshold can also be con-
trolled thro ugh the tr ip computer
c::> page 23, Navigating the menu.
Cruise control
Switching the system on
The cruise control system makes it possible to
drive at o constant speed starting at
20 mph
(30kmlh) .
®-
Fig. 58 Contro l lever with set button
Fig. 59 Display: Selected speed
.,. Pull the lever to position (D c::> fig. 58 to
sw itch the system on .
.,. Drive at the speed you wish to set.
.,. Press button @ to set that speed.
M
,._
0
i
The display c::> fig . 59 will show the set speed.
The display may vary depending on the type of
display in your veh icle. The indicator light
M;ll)~i~ (US model) I. (Canadian mode l) will
also light up in the instrument cluster . .,.

Table of Contents

Related product manuals