Audi R8 2015 - Protected by Copyright. Copying for Private or Commercial Purposes, in Part or in Whole, Is Not; Underbody: Checking Trim, Wheel Housing Liners, Side Members and Pipes;Wiring for Damage; With Respect to the Correctness of Information in this Document. Copyright by AUDI AG; Front Lid Arrester Hook: Lubricating

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3.28 Underbody: checking trim, wheel hous‐
ing liners, side members and pipes/wir‐
ing for damage, and checking that they
are properly secured
Procedure:
– Check all underbody trim panels and wheel housing liners for
tears and cracks.
– Use your hands to check that all underbody trim panels and
wheel housing liners are secured correctly and check for miss‐
ing fasteners.
– Inspect side members for deformations.
– Check visible area of pipes/wiring and connections for dam‐
age and ensure they are secured correctly.
– If faults are found: Renew missing fastener or damaged com‐
ponent.
3.29 Front lid arrester hook: lubricating
Special tools and workshop equipment required
♦ Universal spray oil - G 000 115 A2-
Requirements:
• The vehicle must be at least at room temperature.
Procedure:
– First clean all lubricating points with a lint-free cloth.
– Lubricate arrester hook with universal spray oil - G 000 115
A2- at points marked -arrows-.
– Operate moving parts several times so that the lubricant is
able to penetrate.
– Remove surplus lubricant with cloth.
3.30 Front lid locks: lubricating
Special tools and workshop equipment required
♦ Universal spray oil - G 000 115 A2-
Requirements:
• The vehicle must be at least at room temperature.
Procedure:
– First clean all lubricating points with a lint-free cloth.
Audi R8 2015 ➤
Maintenance - Edition 03.2016
3. Maintenance 41