Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Pry out and detach corrugated ring -2- for clutch end cover
using a screwdriver -1- -arrow-.
– Working through aperture for starter motor, pry out and detach
clutch end cover -2- using a screwdriver -1- or other suitable
lever -arrow-.
– Pry out circlip -2- for drive plate using a screwdriver -1-
-arrow-.
Audi TT 2007 ➤
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
14 Rep. Gr.30 - Clutch
To Next Page
Loading...
