Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Screw adapter for oil filling -VAS 6262- -item A- hand-tight into
opening for inspection plug.
– Hold container with adapter for oil filling -VAS 6262- as high
as possible over gearbox and fill 5.5 litres of gear oil into gear‐
box.
– Start engine and run at idling speed.
– Depress brake pedal and select all gear positions “P, R, N, D,
S” one after the other at idling speed, maintaining each posi‐
tion for at least 3 seconds.
– Shift selector lever into position “P”.
– Check gear oil level and top up as required ⇒ page 66 .
After changing gear oil:
– Connect vehicle diagnostic, testing and information system -
VAS 5051B- to vehicle.
– Select Guided Functions for gearbox.
– Perform the “Basic setting” program.
Audi TT 2007 ➤
Direct shift gearbox 02E, front-wheel drive - Edition 12.2006
9. 75
To Next Page
Loading...
