Audio Technica AT-LP120-USB Installation And Operation

10
Setting up your PC (with Windows XP) to work with your USB Turntable
5. Next, select the Audio tab.
• In the Sound playback area of the window, select your computer’s internal
sound card.
• In the Sound recording area of the window, select USB Audio CODEC.
• Check the following box: Use only default devices.
• Click
Apply; then click OK.

Audio Technica AT-LP120-USB Specifications

General

Interface	USB, Analog
Signal-to-Noise Ratio (SNR)	50 dB
AC adapter frequency	50/60 Hz
AC adapter input voltage	115 - 230 V
Power consumption (typical)	11 W

Weight and Dimensions

Weight	10700 g
Product dimensions (WxHxD)	450 x 352 x 157 mm