Audio Technica AT-LP120-USB Installation And Operation

13
Setting up your PC to work with Audacity
1. Launch the Audacity program from your Start menu.
2. Select Preference from the Edit tab in the Audacity Menu.
3. Select Audio I/O tab at the top left.
• Under Playback, Device, select your internal sound card.
• Under Recording, Device, select USB Audio CODEC.
• Under Recording, Channels, select 2 (Stereo).
• Check the box marked Software Playthrough.
NOTE: The screens shown are from Audacity 1.2.6; later versions of Audacity
may change.

Audio Technica AT-LP120-USB Specifications

General

Interface	USB, Analog
Signal-to-Noise Ratio (SNR)	50 dB
AC adapter frequency	50/60 Hz
AC adapter input voltage	115 - 230 V
Power consumption (typical)	11 W

Weight and Dimensions

Weight	10700 g
Product dimensions (WxHxD)	450 x 352 x 157 mm