Audio Technica AT-LP60 User Manual

Type Belt drive turntable, fully automatic
Platter Aluminum
Motor DC servo-controlled
Speeds 331/3 RPM, 45 RPM
Wow and flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-noise ratio >50 dB (DIN-B)
Cartridge Integral Dual Magnet™ stereo cartridge with diamond stylus
Output level
Pre-amp “PHONO” 2.5mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec
Phono pre-amp gain 36 dB nominal, RIAA equalized
Power 120V AC, 60 Hz, 3W
Dimensions 360.0 mm (14.17″) W x 97.5 mm (3.84″) H x 356.0 mm (14.02″) D
Net weight 2.98 kg (6.6 lbs.)
Furnished accessories
Dual RCA (female) to 3.5 mm (1/8″) mini-plug (male) stereo adapter cable; dual RCA
(female) to 3.5 mm (1/8″) mini-plug (female) stereo adapter cable; 45 RPM adapter
Replacement stylus ATN3600L
System Installation and Operation Manual – Download [optimized]
audio technica AT-LP60 Automatic Stereo Turntable System Installation and Operation Manual – Download

Audio Technica AT-LP60 Specifications

General

Type	Belt-drive audio turntable
Operation	Automatic
Product color	Aluminium, Transparent
Wow & flutter	0.25 %
Nominal speeds	33 1/3, 45 RPM
Platter material	Metal
Signal-to-Noise Ratio (SNR)	50 dB
USB ports quantity	-
Power supply type	AC
AC adapter frequency	60 Hz
AC adapter input voltage	120 V
Power consumption (typical)	3 W
Cables included	RCA

Weight and Dimensions

Depth	356 mm
Width	360 mm
Height	97.5 mm