16
Using wireless connections
This product supports Bluetooth connections. It can be connected with Bluetooth-supporting devices such as
headphones and speakers (hereinafter, “Bluetooth devices”).
About pairing
To connect the product to a Bluetooth device, the product needs to pair (register) with the device. Once they are paired,
you do not need to pair them again.
However, you will need to pair again in the following cases:
If the product is deleted from the Bluetooth device’s connection history.
If the product is sent out for repair.
If the product’s pairing history is reset.
If 9 or more devices are paired.
(The product can be paired with up to 8 devices. When you pair with a new device after pairing with 8 devices,
pairing information for the device with the oldest connection date will be overwritten by the information for the new
device.)
Pairing a Bluetooth device
Read the user manual for the Bluetooth device.
Place the Bluetooth device within 1 m (3.3') of the product to perform pairing correctly.
Note that Audio-Technica cannot guarantee the operation of connected Bluetooth devices.
Disconnect the RCA audio cable.
1
Turn on the product.
2
Press and hold the product’s wireless function button (for about 2 seconds).
The product will start searching for devices and the power supply indicator lamp will start flashing quickly in
white.
3
Set the Bluetooth device (Bluetooth-supporting devices such as headphones and speakers) to the
pairing mode.
To Next Page
Loading...
Need help?
General