EasyManua.ls Logo

Audio Technica AT-SB727

Audio Technica AT-SB727
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
Specifications
Communication specifications
Communication system
Bluetooth version 5.2
Maximum RF output
10 mW EIRP
Maximum communication
range
Line of sight - approx. 10 m (33')
Frequency band
2.402 GHz to 2.480 GHz
Modulation method
GFSK, Pi/4DQPSK, 8DPSK
Spread spectrum method
FHSS
Compatible Bluetooth profiles
A2DP, AVRCP
Supported codec
SBC
Transmission band
20 to 20,000 Hz
Main unit
Power supply
DC 3.6 V lithium ion battery
Drive method
Belt drive
Motor
DC servo motor
Speeds
33-1/3 RPM, 45 RPM
Turntable platter
Aluminum
Wow and flutter
< 0.25% (WTD) at 3 kHz
Signal-to-noise ratio
> 50 dB (DIN-B)
Cartridge model
VM stereo cartridge
Output levels
150 mV nominal at 1 kHz, 5 cm/sec (No phono-output)
Phono Pre-amp gain
36 dB nominal, RIAA equalized
Charging specifications
5 V 0.5 A
Power consumption
1.5 W (when charging)
Charging time
Approx. 12 hours
[1]
Operating time
Approx. 12 hours
[1]
Input jack
USB Type-C jack
Dimensions
100 mm (3.9”) × 290 mm (11”) × 70 mm (2.8”) (W × D × H)
Weight
Approx. 900 g (32 oz)
Operating temperature
5°C to 40°C (41°F to 104°F)
Accessories
USB charging cable (1.5 m (4.9'), USB Type-A / USB Type-C), RCA audio
cable, 45 RPM adapter
Replacement stylus (sold
separately)
ATN3600L
[1] The figures above depend on operating conditions.

Other manuals for Audio Technica AT-SB727