Audio Technica M50x - Communication Specifications

27
Specifications
Headphones
Type
Closed-back dynamic
Driver
45 mm
Sensitivity
99 dB/mW
Frequency response
15 to 28,000 Hz
Impedance
38 ohms
Microphone
Type
MEMS type
Polar pattern
Omnidirectional
Sensitivity
-38 dB (1 V/Pa, at 1 kHz)
Frequency response
85 to 15,000 Hz
Communication specifications
Communication system
Bluetooth version 5.0
Maximum RF output
5.1 mW EIRP
Maximum communication
range
Line of sight - approx. 10 m (33')
Frequency band
2.402 GHz to 2.480 GHz
Modulation method
GFSK, Pi/4DQPSK, 8DPSK
Spread spectrum method
FHSS
Compatible Bluetooth profiles
A2DP, AVRCP, HFP, HSP
Supported codec
LDAC, AAC, SBC
Supported content protection
method
SCMS-T
Transmission band
20 to 40,000 Hz (when LDAC 96 kHz sampling, 990 kbps)
20 to 20,000 Hz (when 44.1 kHz sampling)