8
TClick on “Let’s get you started”, and you’ll be presented with a form which will be partly prefilled
for you automatically. On submitting the form, options will be presented to either go straight to the
downloads to get the software for your Scarlett, or to follow a step-by-step setup guide based on
your choices. Once you have installed the Focusrite Control software to set up and configure your
interface, the Scarlett will be switched out of MSD mode so that it no longer appears as a Mass
Storage Device when connected to your computer.
Your OS should automatically switch the computer’s default audio inputs and outputs to be the Scarlett
Solo. To verify this, right click on the Sound icon on the taskbar and select Sound Settings, and
set the Scarlett as the Input and Output Device.
To Next Page
Loading...
