Release Notes 3. Previous Releases
Version 2.0.13B 17 400HD Series IP Phones for Skype for Business
An audio call cannot switch to video using the Lync PC client's Start My Video option.
Users trying this option (either local or remote parties) receive the notification message
"Call was not completed or has ended" and the call may be disconnected.
• A paired user cannot merge two calls into a conference call using the Lync PC client's Merge
Calls option.
• After installing BToE, Lync client must be used to make conference calls as the IP phone no
longer displays the Conf softkey.
• When a paired user disconnects a second call that they answered or made, and puts a remote
conference on Hold, there's no voice when the user resumes with the remote conference.
Phones participating in a local conference (the originator and the remote parties, assuming they
have AudioCodes 400HD Series IP Phones) cannot perform Blind Transfer.
The Web interface displays some screens that are inapplicable to Skype for Business.
Call Log information is saved to the phone file system once every 24 hours.
Voicemail is supported for Microsoft Exchange Server 2010 and later. A version supporting
Voicemail for Microsoft Exchange Server 2007 will be provided upon a specific request.
With the new dialing method, pressing # doesn't end the dial string. When pressing the speaker or
headset button to initiate the call, the function does work.
When performing a Consultative Transfer, the 'Press Trans to transfer' prompt is displayed briefly
and then disappears.
DHCP Option 160 does not read correctly when there is no "/" (forward slash) at the end of the sent
path.
Presence of Federate users is not displayed in Call Log, though BLF presence works well.
A phone which is in two active calls cannot be joined to a remote conference by one of the two
callers' devices.
If a call was made from the phone's Contact Search and the phone number contains parenthesis
"()", the dialed number is not displayed on the phone's LCD.
Skype for Business mobile client:
• The call may disconnect when an external Skype for Business user calls from the phone to a
local (internal) Skype for Business user, who answers the call with the Skype for Business
mobile client.
• No voice may occur after Blind Transfer.
USB headset limitations:
• USB headset is still in beta version
• Occasionally, the phone's user interface behaves slowly.
• When making a local conference call (and the phone is not in BToE pairing mode), the
phone's user interface reacts slowly.
420HD phone: Configured Function Keys do not function after the phone parks a call.
A very short beep sound is heard when answering a call using the phone headset hard key.
Can't perform group call pick up for incoming calls from federated Lync users.
3.1.3 Resolved Constraints in Version 2.0.13
The following constraints from the previous release have now been resolved in Version 2.0.13:
Boss Admin:
• In scenarios in which the Admin uses the Call on Behalf softkey or the Directory softkey, the
next outgoing call may be performed as a 'Call On Behalf' call even if it wasn't.
• In scenarios where the Admin uses the Handoff softkey to handoff the call to the Boss and
then the Boss tries to handoff the call back to the Admin, the call may fail.
• Domain is added to the caller ID name when making an 'On Behalf Of' call.
To Next Page
Loading...
