400HD Series IP Phones for Skype for Business
Version 2.0.13B 30 Document #: LTRT-08271
3.7 Version 2.0.7
3.7.1 What's New in Version 2.0.7
Boss Admin feature
• Allows users to establish a relationship between a boss's phone and an
administrative secretary's phone.
• Streamlines office workflow and enhances efficiency.
• Each phone can support up to five bosses or admins. One boss can have
up to five admins. One admin can have up to five bosses. A many-to-
many configuration is also supported.
• Applies to AudioCodes' 430HD and 44HD IP phone models.
• Delegation must be allowed for the user in the environment, else
configuration will not work.
All users must be allowed to configure all users as delegates.
Better Together over Ethernet (BToE) enhancements
• Allows video calls. When there's an incoming video call, users can:
Answer from the phone; the call will fall back to audio.
Answer from the PC client and have full audio and video using the PC audio device.
• BToE TCP port can be configured to communicate between the BToE PC
application and the phone.
Automatic mass provisioning and management using the AudioCodes Element Management
System (EMS)
• Automatic mass provisioning of IP phones using the DHCP provisioning
method can now be performed from the AudioCodes EMS Provisioning
Server in the IP Phones Management Server, accessible from the EMS.
• For detailed information, see the IP Phone Management Server
Administrator's Manual.
New Acoustic Echo Canceller for significantly improved IP telephony voice quality.
Login to the Web interface is now performed pulling the 'User Name' and 'Password' parameter
values configured in the configuration file.
• The default 'User Name' and 'Password' values are admin and 1234
respectively.
• If either or both of these parameter values are unconfigured in the
configuration file, users can log in to the Web interface using the same
Microsoft password/PIN they used to sign in to the IP phone (to maintain
backward compatibility).
New ways of dialing. Users can now:
• Press the speaker or headset button, or pick up the handset, and when the dial tone is heard,
start dialing; touch tones are played. Users can then press either the # (digit) key or the Dial
softkey to 'send' the number, or wait a few seconds for the number to automatically be sent.
-OR-
• On the phone's dial pad, press the digit keys of the called party's number (there are no touch
tones) and then press the Dial softkey to trigger the call. This is the equivalent of the SEND
key on mobile devices.
Backward compatibility is supported by setting the 'voip/dialing/on_hook_dialing' configuration
file parameter to OPEN_DEFAULT_AUDIO_DEVICE
To Next Page
Loading...
