Release Notes 3. Previous Releases
Version 2.0.13B 25 400HD Series IP Phones for Skype for Business
• A paired user cannot merge two calls into a conference call using the Lync PC client's Merge
Calls option.
• After installing BToE, use your Lync client to make conference calls as the IP phone no longer
displays the Conf softkey.
• When a paired user disconnects a second call that they answered or made, and puts a remote
conference on Hold, there's no voice when the user resumes with the remote conference.
The Web interface is not completely Lync-optimized; some screens inapplicable to Lync are still
displayed.
Call Log information is saved to the phone file system once every 24 hours.
Voicemail is supported for Microsoft Exchange Server 2010 and above. A version supporting
Voicemail for Microsoft Exchange Server 2007 will be provided upon a specific request.
With the new dialing method, pressing # doesn't end the dial string. When pressing the speaker or
headset button to initiate the call, the function does work.
When performing a Consultative Transfer, the 'Press Trans to transfer' prompt is displayed briefly
and then disappears.
DHCP Option 160 does not read correctly when there is no "/" (forward slash) at the end of the sent
path.
MPOP (Multiple Points of Presence) - in a Lync environment, each user should be able to have up
to five devices connected simultaneously, for example, PC client, mobile application, and up to
three IP phones.
In some Lync environments, a noise may be heard on the phone when calling a user configured
with 'Simultaneously Ring'.
In some environments, the phone may send a request for a new IP address once every three
DHCP lease time cycles. A fix for this issue already exists (as part of the next release) and can be
provided on request.
Presence of Federate users is not displayed in Call Log, though BLF presence works well.
Calls between two phones, signed in with the same user, cannot be made.
A phone which is in two active calls cannot be joined to a remote conference by one of the two
callers' devices.
The phone cannot perform Semi-Attendant transfer via Call Log or Corporate Directory.
3.3.3 Resolved Constraints in Version 2.0.11
The following constraints from the previous release have now been resolved in Version 2.0.11:
Boss Admin:
• The Admin can’t send a call to the Boss's voicemail.
BToE:
• When a paired user presses the phone's mute key, there's no indication in the Lync client's
Conversation window. Moreover, the user cannot mute from the Lync PC client Conversation
window when BToE is running.
• An IM (Instant Message) conversation is stored as a Missed Call for a paired user.
• The BToE PC application switches to 'Disconnected' when performing a first call (incoming /
outgoing) after an idle time.
• An IM is not accepted when a paired user is in two active calls.
• The BToE PC application may occasionally disconnect and reconnect.
During an existing call, this occurrence may change the default audio
device from the phone to the PC, and the user may anticipate that the call
was disconnected.
In an environment comprising Exchange Online (as part of Office 365), a call from the phone to a
user who has Exchange Online voicemail may sometimes not reach the voicemail.
With the new dialing method, after pressing the digits of a phone number and then picking up the
To Next Page
Loading...
