AudioCodes C450HD - Collecting Media Logs (*.Blog) from the Phone

CHAPTER7 Troubleshooting
C448HD C450HD | Users & Administrator's Manual
3. OpenthefolderonthePCtowhichyoucommandedtheapplicationtosendthe
information.
4. Unzipthezippedfilesandopenthetxtfilestoviewthereport.
Activating DSP Recording
NetworkadministratorscanactivateDSPrecordingusingAudioCodes'SSHprotocolbased
AndroidPhoneUtility.
➢ To activate DSP Recording:
1. IntheAudioCodesAndroidPhoneUtility(seeAndroidPhoneUtilityonpage110formore
informationabouttheapplication),enterthephone'sIPaddress,clickSSH Connectand
thenclicktheBrowsebuttonnexttothefield'PCfolder'toconfigureafolderonthePCto
whichtosendtheinformation.
2. Inthe'PCIPAddress'field,entertheIPaddressofthePConwhichtheutilityisinstalled
andthenclicktheStart DSP Record button.
3. Afteraperiodofrecording,clickStop DSP Record.
4. ViewtheDSPrecordinginthePCfolderyouconfigured.
Network administrators can alternatively activate a DSP recording using SSH pro-
tocol without the Android Phone Utility, as shown next.
- 120 -