AudioCodes Mediant 800 Series User Manual

CHAPTER2 Unpacking the Device
Mediant 800 Gateway & E-SBC | Hardware Installation Manual
2 Unpacking the Device
Follow the procedure below for unpacking the carton in which the device is shipped.
➢ To unpack the device:
1. Open the carton and remove packing materials.
2. Remove the chassis from the carton.
3. Check that there is no equipment damage.
4. Ensure that in addition to the chassis, the package contains the following items:
● Four anti-slide bumpers for desktop installation
● Two mounting brackets for 19-inch rack mounting
● One AC power cord
● (Mediant 800C only) one AC/DC power adaptor (optional, separate orderable item)
5. Check, retain and process any documents.
If there are any damaged or missing items, notify your AudioCodes sales representative.
- 2 -

AudioCodes Mediant 800 Series Specifications

General

VoIP Protocols	SIP, H.323
Humidity	10% to 90% non-condensing
Interfaces	FXS, FXO, BRI, E1/T1
Network Interfaces	10/100/1000 Ethernet
Telephony Interfaces	FXS, FXO, BRI, E1/T1
Management	Web GUI, CLI, SNMP
Security	TLS, SRTP, HTTPS, SSH, IPsec
Power Supply	AC 100-240V, 50/60Hz
Type	VoIP Gateway
Redundancy	Optional
Fax Support	T.38, G.711 pass-through
Codecs	G.711, G.726, G.729, G.723
Ethernet Interfaces	Up to 4 x 10/100/1000Base-T
Dimensions	1U
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C (-13°F to 158°F)