Configuration Note 6. Debugging USB Devices
Version 7.2 27 Troubleshooting the MSBR
6 Debugging USB Devices
AudioCodes provides several USB debug utilities for debugging USB devices.
If the 3G/4G USB modem fails to connect to the MSBR, the following information needs to
be provided:
USB Hardware Information
Software Driver Definitions
AT Modem Command Responses
6.1 Providing USB Hardware Information
Run the “show system assembly” command to display USB hardware information.
show system assembly
Board Assembly Info:
|Slot No. | Ports |Module Type |
| 0/0 | 1 | WAN-Copper |
| 0/1 | 1 | WAN-Fiber |
| 1 | 1-4 | LAN-GE |
| 2 | 1 | E1/T1 |
USB Port 1: Manufacturer - HUAWEI Technology, Product - HUAWEI
Mobile, Product Id - 1001, Vendor Id - 12d1, Type - Cellular
USB Port 2: Manufacturer - SAMSUNG, Product - Flash Disk, Product