EasyManuals Logo

AudioCodes Mediant User Manual

AudioCodes Mediant
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Configuration Note 6. Bridge Group Virtual Interface (BVI) Interfaces
Version 6.8 23 Mediant MSBR
The following show output is displayed after connecting a host on VLAN 100:
MSBR# show data interfaces bvi 100
BVI 100 is Connected.
Description: Bridge
Hardware address is 00:90:8f:4f:5a:87
State Time: 2:20:10
Time since creation: 2:22:16
Time since last counters clear : 2:20:10
mtu auto
DNS is configured static
DNS primary IP address is 0.0.0.0
DNS secondary IP address is 0.0.0.0
rx_packets 12159 rx_bytes 1498976 rx_dropped
0 rx_errors 0
tx_packets 5498 tx_bytes 459573 tx_dropped
0 tx_errors 0
5-minute input rate: 621 bits/sec, 0 packets/sec
5-minute output rate: 43 bits/sec, 0 packets/sec
15-second input rate: 883 bits/sec, 2 packets/sec
15-second output rate: 806 bits/sec, 2 packets/sec

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant and is the answer not in the manual?

AudioCodes Mediant Specifications

General IconGeneral
ProtocolsSIP, H.323, MGCP
SecurityTLS, SRTP, Firewall
ManagementWeb GUI, CLI, SNMP
PortsFXS, FXO
Voice CodecsG.711, G.723, G.726, G.729, iLBC, Opus
Power SupplyAC or DC
DimensionsVaries by model
CategoryHybrid VoIP Gateway & SBC

Related product manuals