AudioCodes Mediant - Example

Configuration Note 28 Document #: LTRT-31672
Layer 2 Bridging using CLI
8.2 Example
This example shows the configuration of QinQ on gigabitethernet 0/0.
interface GigabitEthernet 0/0.2
no ip address
mtu auto
desc "WAN Copper.2"
no ipv6 enable
no service dhcp
ip dns server auto
no shutdown
exit
interface GigabitEthernet 0/0.2.100
ip address 50.50.50.1 255.255.255.0
mtu auto
desc "WAN Copper.2.100"
no ipv6 enable
no service dhcp
ip dns server static
napt
firewall enable
no shutdown
exit