AudioCodes MediaPack MP-114 User Manual

MediaPack SIP
MediaPack SIP User’s Manual 90 Document #: LTRT-65405
Table 5-14: Reasons for Alternative Routing ini File Parameter
Parameter Name in ini File Parameter Format
AltRouteCauseTel2IP
AltRouteCauseTel2IP = <SIP Call failure reason from IP>
For example:
AltRouteCauseTel2IP = 408 (Response timeout).
AltRouteCauseTel2IP = 486 (User is busy).
Note: This parameter can appear up to 4 times.
AltRouteCauseIP2Tel
AltRouteCauseIP2Tel = <Call failure reason from Tel>
For example:
AltRouteCauseIP2Tel = 3 (No route to destination).
AltRouteCauseIP2Tel = 17 (Busy here).
Note: This parameter can appear up to 4 times.

AudioCodes MediaPack MP-114 Specifications

General

Model	MP-114
Category	Gateway
Analog Ports	4 FXS
Network Interfaces	2 x 10/100Base-T Ethernet
Voice Codecs	G.711, G.726, G.723.1, G.729A/B
Fax Support	T.38
Management	Web-based management, CLI, SNMP
Security	SRTP, TLS, HTTPS
Ports	4 RJ-11, 2 RJ-45
Protocols	SIP, H.323
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90%, non-condensing